Velopex Intra-X
Processes all sizes of intra-oral film. High quality, archivable radiographs are delivered dry in four and a half minutes. Endodontic films may be viewed wet after only two minutes and 30 seconds.
Easy-to-use daylight loader (optional) eliminates the need for a darkroom. Films are processed automatically on insertion of the film. Unique film transport system ensures consistently excellent results. Electronic management system shows machine status and help codes. Compact dimensions, simple installation and minimal servicing.
Specifications
DIMENSIONS: Width: 290mm/11.5”
Height: 315mm/12.5”
Depth: 435mm/17” (- daylight loader)
635mm/25” (+ daylight loader)
WEIGHT: Empty: 12.1Kg (26.5 lb)
Full tanks: 13.9Kg (30.5 lb)
TANK CAPACITY: 1.5 US Quarts each tank
VOLTAGE: 220-240V, 110-120V (50/60Hz)
CHEMICAL TEMP: Developer: 25ºC (77ºF)
Fixer: 27.5ºC (81.5ºF)
WARM-UP TIME: 10 minutes approx.
FILM FEED SPEED: 470mm (18.5”) per min
MAX FILM WIDTH: 65mm (2.5”)
PROCESSING TIME: Dry: 5 mins approx.
Wet: 2 mins approx.
COMPLIES WITH: IEC61010-1:2001 (2nd edition)
EN 61010-1:2001 (2nd edition)
UL61010-1 July 12, 2004 deviations
CAN/CSA-C22.2 No.61010-1
EN60601-1-2:2001
Easy-to-use daylight loader (optional) eliminates the need for a darkroom. Films are processed automatically on insertion of the film. Unique film transport system ensures consistently excellent results. Electronic management system shows machine status and help codes. Compact dimensions, simple installation and minimal servicing.
Specifications
DIMENSIONS: Width: 290mm/11.5”
Height: 315mm/12.5”
Depth: 435mm/17” (- daylight loader)
635mm/25” (+ daylight loader)
WEIGHT: Empty: 12.1Kg (26.5 lb)
Full tanks: 13.9Kg (30.5 lb)
TANK CAPACITY: 1.5 US Quarts each tank
VOLTAGE: 220-240V, 110-120V (50/60Hz)
CHEMICAL TEMP: Developer: 25ºC (77ºF)
Fixer: 27.5ºC (81.5ºF)
WARM-UP TIME: 10 minutes approx.
FILM FEED SPEED: 470mm (18.5”) per min
MAX FILM WIDTH: 65mm (2.5”)
PROCESSING TIME: Dry: 5 mins approx.
Wet: 2 mins approx.
COMPLIES WITH: IEC61010-1:2001 (2nd edition)
EN 61010-1:2001 (2nd edition)
UL61010-1 July 12, 2004 deviations
CAN/CSA-C22.2 No.61010-1
EN60601-1-2:2001
Velopex Xtender
Summary
Processes all sizes of film from intra-oral size, to panoramic and cephalometric (full skull size). High quality, archivable radiographs are delivered dry in five minutes. Endodontic films may be viewed wet (archival) after only two minutes 30 seconds. Has high capacity external reservoirs for processor chemistry and recirculation pump for automatic chemical recycling with extended chemical life. Includes unit self-filling from developer and fixer reservoirs.
Easy-to-use daylight loader (optional) eliminates the need for a darkroom. Films are processed automatically on insertion of the film. Unique film transport system ensures consistently excellent results.Electronic management system shows machine status and help codes. Compact dimensions, simple installation and minimal servicing.
Specifications
DIMENSIONS: Width: 20”
Height: 13.5”
Depth: 18.5” (- daylight loader)
29” (+ daylight loader)
WEIGHT: Empty: 40.7 lb
Full tanks: 53.9 lb
TANK CAPACITY: One US Gallon for developer and fixer tanks
.75 US Gallons for water tank
VOLTAGE: 100-120V, 200-240V (50/60Hz)
CHEMICAL TEMP: Developer: 77ºF
Fixer: 81.5ºF
WARM-UP TIME: 10 minutes approx.
FILM FEED SPEED: 18.5” per min
MAX FILM WIDTH: 10.2”
PROCESSING TIME: Dry: 5 mins approx.
Wet: 2 mins approx.
COMPLIES WITH: IEC61010-1:2001 (2nd edition)
EN 61010-1:2001 (2nd edition)
UL 61010-1 July 12, 2004 deviations
CAN/CSA-C22.2 No.61010-1
Processes all sizes of film from intra-oral size, to panoramic and cephalometric (full skull size). High quality, archivable radiographs are delivered dry in five minutes. Endodontic films may be viewed wet (archival) after only two minutes 30 seconds. Has high capacity external reservoirs for processor chemistry and recirculation pump for automatic chemical recycling with extended chemical life. Includes unit self-filling from developer and fixer reservoirs.
Easy-to-use daylight loader (optional) eliminates the need for a darkroom. Films are processed automatically on insertion of the film. Unique film transport system ensures consistently excellent results.Electronic management system shows machine status and help codes. Compact dimensions, simple installation and minimal servicing.
Specifications
DIMENSIONS: Width: 20”
Height: 13.5”
Depth: 18.5” (- daylight loader)
29” (+ daylight loader)
WEIGHT: Empty: 40.7 lb
Full tanks: 53.9 lb
TANK CAPACITY: One US Gallon for developer and fixer tanks
.75 US Gallons for water tank
VOLTAGE: 100-120V, 200-240V (50/60Hz)
CHEMICAL TEMP: Developer: 77ºF
Fixer: 81.5ºF
WARM-UP TIME: 10 minutes approx.
FILM FEED SPEED: 18.5” per min
MAX FILM WIDTH: 10.2”
PROCESSING TIME: Dry: 5 mins approx.
Wet: 2 mins approx.
COMPLIES WITH: IEC61010-1:2001 (2nd edition)
EN 61010-1:2001 (2nd edition)
UL 61010-1 July 12, 2004 deviations
CAN/CSA-C22.2 No.61010-1
Velopex Hi-Lite Viewer
Quality x-ray film viewers to suit every professional need. Velopex viewing systems have been developed specifically for dental and veterinary applications. They offer levels of quality and performance superior to ordinary lightboxes, and provide the bright, uniform, glare-free illumination that enable details of potentially crucial diagnostic significance to be examined in comfort. Wide choice of sizes for wall mounting or free standing use. Uniform illumination for accurate examination of radiographs of all sizes. Hi-Lite Viewer comes with tracked magnifier. Multiple Screen Super Viewers can be used for side-by-side comparison of radiographs and the Slim Line Viewers offer choice of mains or battery operation.
Velopex Hi-Lite Viewer
A slim lightbox for all dental film sizes from intra-oral to panoramic, with excellent illumination to the extreme edges of the viewing area. Continuous film clips run along the top and bottom of the screen, and the standard tube is inexpensive and easy to change. The Hi-Lite can be wall mounted or free standing, and is also ideal for recessing into cabinetry for a clear, streamlined look. A tracked magnifier is standard.
Specifications
DIMENSIONS: (OVERALL) 327 x 210 x 60.5mm (12?” x 8?” x 2½”)
VIEWING AREA:
320 x 150mm
(12?” x 5?”)
POWER SUPPLY: 115v 60Hz
FLUORESCENT TUBE: 300mm x 8w Daylight; electronic choke for instant illumination
CASE CONSTRUCTION: Neutral white plastic finish
WEIGHT: 1.13Kg (2.5 lbs)
Velopex Hi-Lite Viewer
A slim lightbox for all dental film sizes from intra-oral to panoramic, with excellent illumination to the extreme edges of the viewing area. Continuous film clips run along the top and bottom of the screen, and the standard tube is inexpensive and easy to change. The Hi-Lite can be wall mounted or free standing, and is also ideal for recessing into cabinetry for a clear, streamlined look. A tracked magnifier is standard.
Specifications
DIMENSIONS: (OVERALL) 327 x 210 x 60.5mm (12?” x 8?” x 2½”)
VIEWING AREA:
320 x 150mm
(12?” x 5?”)
POWER SUPPLY: 115v 60Hz
FLUORESCENT TUBE: 300mm x 8w Daylight; electronic choke for instant illumination
CASE CONSTRUCTION: Neutral white plastic finish
WEIGHT: 1.13Kg (2.5 lbs)
Velopex Diode laser Colour
The Diode laser - ‘Colour’ is ideal for all soft tissue work as it does not interact with teeth, bone or implants. Is particularly suitable for periodontal and endodontic procedures, with valuable bactericidal effects. It has a high level of patient acceptability and virtually eliminates pain and bleeding. The ‘Colour’ laser is easy to use with its touch screen menu-based colour control system. The laser aiming beam facilitates simple and accurate postioning. The Velopex Diode Laser also has an extremely effective tooth whitening capability.
Specifications
DIMENSIONS: Width: 170mm/6.7”
Height: 235mm/9.2”
depth: 320mm/12.6”
WEIGHT: 4.1Kg (9.9 lbs)
POWER REQUIREMENT: 100-220VAC/ 50-60Hz 250VA
LASER TYPE: Solid State Diode Laser (class IV)
WAVE LENGTH:
810nm
OUTPUT POWER:
Max. 5.0W at output port
OUTPUT PORT:
SMA 905
OPTICAL FIBRES: From menu 320µ bare Aiming beam: 650nm, 2mw (class 3A)
Main beam: 810nm, 5cw (class 4)
SURGICAL HANDPIECE: Fibre gripping
DUTY RATIO: On/ Off duration adjustable
COOLING: Thermal Electrically Cooled with Forced Air
OPERATION TEMP: 10 °C to 35 °C
STORAGE TEMP: -20 °C to 70 °C
DISPLAY: 5 inch colour touch screen
Specifications
DIMENSIONS: Width: 170mm/6.7”
Height: 235mm/9.2”
depth: 320mm/12.6”
WEIGHT: 4.1Kg (9.9 lbs)
POWER REQUIREMENT: 100-220VAC/ 50-60Hz 250VA
LASER TYPE: Solid State Diode Laser (class IV)
WAVE LENGTH:
810nm
OUTPUT POWER:
Max. 5.0W at output port
OUTPUT PORT:
SMA 905
OPTICAL FIBRES: From menu 320µ bare Aiming beam: 650nm, 2mw (class 3A)
Main beam: 810nm, 5cw (class 4)
SURGICAL HANDPIECE: Fibre gripping
DUTY RATIO: On/ Off duration adjustable
COOLING: Thermal Electrically Cooled with Forced Air
OPERATION TEMP: 10 °C to 35 °C
STORAGE TEMP: -20 °C to 70 °C
DISPLAY: 5 inch colour touch screen
Velopex Aquacut Quattro
Aquacut Quattro is the ideal tool for minimally invasive and cosmetic dentistry. Its patient-friendly stain removal and cavity preparation make it a favorite with your patients. It’s a fraction of the cost of a hard tissue laser, fast, efficient, cutting and cleaning with very high levels of patient acceptability. No direct contact with the tooth structure - no vibration, turbine noise, heat generation or smell, and greatly reduced need for local anesthesia. Unique handpiece creates a fluid curtain around the powder medium, for increased efficiency during cutting, and control of airborne powder and debris. Triple action foot control speeds treatment by allowing cut, wash and dry operations through the same handpiece. No chipping or stress fracturing, and minimal loss of sound tooth material. An ideal tool for the repair of composites. Aquacut Quattro gives you greater control and flexibility than any other piece of equipment that you own.
Class I – Class V cavity preparation, cleaning & decay removal
Crown preparation before cementation
Preventive Resin Restoration (PRR)
Composite/porcelain repair and restoration
Orthodontic bracket etching
Cleaning & polishing, removing tea/tobacco staining
Removing vegetal plugs or other matter prior to diagnosis of hidden caries
Aquacut Quattro without drill or anaesthetic
Removal of glass ionomer and composite restorations, conservative preparations, etching porcelain and cleaning and etching of tooth surfaces before fissure sealing can all be done without the drill; often without the use of anesthetic.
How does Aquacut Quattro compare for speed?
Speed, powder and water volume can be varied within very wide limits, giving the Clinician complete control and high versatility of operation: mostly used without anesthetic, in most cases there will be a saving of time with each patient.
How safe is Aluminium Oxide?
Aluminium Oxide is not toxic and will not cause respiratory problems. Aquacut works with 53 micron powder and 29 micron, and this places them well clear of the allowable (legal) safe level in the event of any accidental inhalation.
Is soft tissue affected?
Soft tissue is not likely to be damaged since the energy of the abrasion process is absorbed by any soft tissue coming into contact.
Sensitivity of teeth under treatment
Sensitivity in the dentine is usually swiftly controlled by a slight reduction in air pressure. Cutting with short abrasive bursts will help to avoid any patient reaction. Cutting near the pulp exposure this is especially important – with low air pressure the experienced Clinician can prepare cavities without patient sensitivity.
Controlling the depth when cutting
The tip should be in motion and with short bursts of the abrasive stream. If the tip is held stationary with active abrasion the depth of cut increases.
If soft decay is encountered
Soft decay is best removed with Sodium Bicarbonate or using your usual method. For some patients anesthesia may be necessary, but most will tolerate the mild discomfort once the procedure has been explained to them.
Using Aquacut Quattro for diagnosis of caries
In “cleaning/polishing” mode using Sodium Bicarbonate, foreign matter e.g. a vegetal plug may be concealing a carious lesion within a fissure or pit. At the twist of a control the Clinician can change to the chosen cutting medium – WITHOUT REMOVING THE HANDPIECE FROM THE ORAL CAVITY – and proceed with treating the lesion. This diagnostic use of Aquacut Quattro has proved to be a great attribute for the dental practitioner, especially for its assistance in conservative dentistry.
Versatility of control
The Clinician has a wide range of settings in his control, with air pressure, powder and water volume variable to suit all his abrasion procedures. Conservative, time-saving, patient-friendly.
Specifications
DIMENSIONS: Width: 300mm/11.2”
Height: 240mm/8.85”
Depth: 240mm/9.05”
WEIGHT: 4.1Kg (9 lbs)
EXTERNAL AIR SUPPLY: Clean, dry compressed air, 6 bar (90psi) min, 7.5 bar (110psi) max; inlet air supply 4mm push-in fitting
FOOT CONTROL: Triple action foot control for cut, wash and dry;
2m (6’) three-core pneumatic supply tube
OUTPUT PRESSURE: Infinitely variable cutting/ polishing air pressure between 0-7 bar (100psi), controllable via rotating knob and pressure gauge
CUTTING MEDIA: 53 & 29 micron Aluminium Oxide; powder rate infinitely variable between 0-6g/ min (0.2 oz) via rotating knob and pressure gauge
POLISHING MEDIUM: Sodium Bicarbonate
HANDPIECE: Anodised aluminium with protective plastic sleeve; quick release mechanism for easy nozzle changes; stainless steel nozzles with tungsten carbide tips.
ACCESSORIES:
HANDPIECE: 0.4mm, 0.6mm & 0.8mm colour coded for easy tip size identification
COMPRESSOR: See Zephyr Compres
Class I – Class V cavity preparation, cleaning & decay removal
Crown preparation before cementation
Preventive Resin Restoration (PRR)
Composite/porcelain repair and restoration
Orthodontic bracket etching
Cleaning & polishing, removing tea/tobacco staining
Removing vegetal plugs or other matter prior to diagnosis of hidden caries
Aquacut Quattro without drill or anaesthetic
Removal of glass ionomer and composite restorations, conservative preparations, etching porcelain and cleaning and etching of tooth surfaces before fissure sealing can all be done without the drill; often without the use of anesthetic.
How does Aquacut Quattro compare for speed?
Speed, powder and water volume can be varied within very wide limits, giving the Clinician complete control and high versatility of operation: mostly used without anesthetic, in most cases there will be a saving of time with each patient.
How safe is Aluminium Oxide?
Aluminium Oxide is not toxic and will not cause respiratory problems. Aquacut works with 53 micron powder and 29 micron, and this places them well clear of the allowable (legal) safe level in the event of any accidental inhalation.
Is soft tissue affected?
Soft tissue is not likely to be damaged since the energy of the abrasion process is absorbed by any soft tissue coming into contact.
Sensitivity of teeth under treatment
Sensitivity in the dentine is usually swiftly controlled by a slight reduction in air pressure. Cutting with short abrasive bursts will help to avoid any patient reaction. Cutting near the pulp exposure this is especially important – with low air pressure the experienced Clinician can prepare cavities without patient sensitivity.
Controlling the depth when cutting
The tip should be in motion and with short bursts of the abrasive stream. If the tip is held stationary with active abrasion the depth of cut increases.
If soft decay is encountered
Soft decay is best removed with Sodium Bicarbonate or using your usual method. For some patients anesthesia may be necessary, but most will tolerate the mild discomfort once the procedure has been explained to them.
Using Aquacut Quattro for diagnosis of caries
In “cleaning/polishing” mode using Sodium Bicarbonate, foreign matter e.g. a vegetal plug may be concealing a carious lesion within a fissure or pit. At the twist of a control the Clinician can change to the chosen cutting medium – WITHOUT REMOVING THE HANDPIECE FROM THE ORAL CAVITY – and proceed with treating the lesion. This diagnostic use of Aquacut Quattro has proved to be a great attribute for the dental practitioner, especially for its assistance in conservative dentistry.
Versatility of control
The Clinician has a wide range of settings in his control, with air pressure, powder and water volume variable to suit all his abrasion procedures. Conservative, time-saving, patient-friendly.
Specifications
DIMENSIONS: Width: 300mm/11.2”
Height: 240mm/8.85”
Depth: 240mm/9.05”
WEIGHT: 4.1Kg (9 lbs)
EXTERNAL AIR SUPPLY: Clean, dry compressed air, 6 bar (90psi) min, 7.5 bar (110psi) max; inlet air supply 4mm push-in fitting
FOOT CONTROL: Triple action foot control for cut, wash and dry;
2m (6’) three-core pneumatic supply tube
OUTPUT PRESSURE: Infinitely variable cutting/ polishing air pressure between 0-7 bar (100psi), controllable via rotating knob and pressure gauge
CUTTING MEDIA: 53 & 29 micron Aluminium Oxide; powder rate infinitely variable between 0-6g/ min (0.2 oz) via rotating knob and pressure gauge
POLISHING MEDIUM: Sodium Bicarbonate
HANDPIECE: Anodised aluminium with protective plastic sleeve; quick release mechanism for easy nozzle changes; stainless steel nozzles with tungsten carbide tips.
ACCESSORIES:
HANDPIECE: 0.4mm, 0.6mm & 0.8mm colour coded for easy tip size identification
COMPRESSOR: See Zephyr Compres
Velopex Zephyr Compressor
The beautifully finished Velopex Zephyr 150 has been designed to operate in the surgery, to take in air at atmospheric pressure and provide two pressurized outputs. This is the first Compressor designed specifically to be sited within the Dental Surgery and can be mounted either on a Velopex trolley (which can also house the Velopex Aquacut Quattro as well as the Velopex Colour Diode Laser) or sited within cabinetry. The twin air outputs allow use for other machines, therefore enabling you to run extra air-driven equipment as required. Using one fixed pressure output for the Velopex Aquacut Quattro at 7.5bar and the other variable output – up to 7.5bar - the Velopex Zephyr 150 can be used to power air turbines as well as scalers, 3-in-1 syringes, chairs or side delivery units. The small capacity holding tank means low maintenance, whilst the fast cycle twin head pump provides over 150 litres of dry, oil-free, sanitised compressed air per minute. This makes one Velopex Zephyr 150 the ideal base for a complete surgery air supply. For multi-surgery practices, rather than having a central compressor or, where a failure closes the entire practice - use a Velopex Zephyr 150 in each surgery.
Specifications
DIMENSIONS: Width: 238mm/9 38”
Height: 381mm/15”
depth: 457mm/18”
WEIGHT: 22.3Kg (49.2lbs)
OUTPUTS: Air 1: 0.0-1.0 MPa (0-10 Bar) Adjustable output
Air 2: 0.75MPa (7.5 Bar) Fixed output
MACHINE OUTPUT: Air: 150 litres/ minute - constant running
INPUTS: EU: AC Input - 220V Frequency - 50Hz
US: AC Input - 110V Frequency - 60Hz
POWER RATING: 870 Watts (1.17Hp)
FUSE RATED EU & US: 10A Slow Blow (T)
TANK VOLUME: 0.80 litres
OIL LESS OPERATION: Teflon self lubricating piston housing
OPERATING CONDITIONS: Not to be operated below 5°C
Not to be operated above 40°C
Not to be operated above 80% Humidity
NOISE: <600b
Specifications
DIMENSIONS: Width: 238mm/9 38”
Height: 381mm/15”
depth: 457mm/18”
WEIGHT: 22.3Kg (49.2lbs)
OUTPUTS: Air 1: 0.0-1.0 MPa (0-10 Bar) Adjustable output
Air 2: 0.75MPa (7.5 Bar) Fixed output
MACHINE OUTPUT: Air: 150 litres/ minute - constant running
INPUTS: EU: AC Input - 220V Frequency - 50Hz
US: AC Input - 110V Frequency - 60Hz
POWER RATING: 870 Watts (1.17Hp)
FUSE RATED EU & US: 10A Slow Blow (T)
TANK VOLUME: 0.80 litres
OIL LESS OPERATION: Teflon self lubricating piston housing
OPERATING CONDITIONS: Not to be operated below 5°C
Not to be operated above 40°C
Not to be operated above 80% Humidity
NOISE: <600b